Electrical & Electronics Components
Current-carrying and connection components for switchgear, wiring assemblies and PCBs. Terminals, neutral links, connectors, pins, contacts, cable glands, earthing components, battery terminals, brass fuse terminals and EV charging pins, machined in brass and copper.
The actual parts
Electrical parts made at Jay Ashapura.
Terminals, links, studs, clamps, pins and fuse terminals photographed on the floor in Jamnagar. Every one was made to a customer drawing, which is how yours would be made too.
Threads & finishes
- ISO Metric threads
- Natural brass
- Electro tin
- Nickel
- Chrome
- Silver
- Gold
- Zinc blue
Where these parts go
- Distribution & control panels
- Switchgear
- Circuit protection
- Industrial automation
- Fuse holders
- Power transmission
- Solar, wind & smart grid
Conductivity, plating and contact geometry are set by your drawing, not by a catalogue. Send it and get a quote →
Types we supply
Every electrical part, to your spec.
Current-carrying and connection components machined and plated for conductivity, low contact resistance and corrosion resistance.
Terminals & Connectors
- Terminals
- Terminal Blocks
- Ring / Spade Terminals
- Connectors
- Wire Connectors
- Terminal Ends
Pins, Contacts & Sockets
- Plug Pins
- Socket Pins
- Male / Female Contacts
- Fuse Contacts & Clips
- Sockets
- EV Charging Pins
Links, Bars & Glands
- Neutral Links
- Neutral / Earth Bars
- Bus Bars
- Cable Lugs
- Cable Glands
- Cable Ferrules
Earthing & Power
- Earthing Rods & Clamps
- Grounding Lugs
- Bonding Components
- Battery Terminals
- Switchgear Parts
- Grub / Terminal Screws
Not only brass. The same part can be produced in stainless steel, copper, aluminium and other engineering alloys. Send the drawing with the grade you need and it is quoted in that material. See full material range →
Where they're used
Applications & industries served.
Applications
- Distribution & control panels
- Switchgear assemblies
- Circuit protection devices
- Terminal blocks
- Fuse holders
- Industrial automation
- Power transmission
Industries served
- Electrical & electronics
- Switchgear & panels
- Renewable energy
- Automotive
- Industrial automation
- Power & utilities
See all the sectors we serve on our Industries page.
Materials for electrical parts
Conductivity first, then machinability.
Matched to conductivity and compliance, with copper available where maximum conductivity is required. See full quality & traceability →
Free-Cutting Brass
C36000 · C37700 · CZ121 · IS 319 Gr I/II
Nickel-Plated Brass
Added corrosion resistance in humid or harsh panels
Tin-Plated Brass
Better conductivity and oxidation protection
Copper & Aluminium
On request, maximum conductivity, lighter busbars
How they're made
Manufacturing process.
Stock selection
Certified brass bar, wire or strip selected for conductivity and current rating.
Machining & stamping
CNC turning, milling and pressing to form pins, terminals, links and contacts.
Plating
Tin, silver, nickel or gold plating for solderability, conductivity and corrosion resistance.
Inspection & test
Dimensional, plating-thickness and (on request) conductivity and contact-resistance checks.
Finishes, inspection & packaging
Delivered ready to assemble.
Plating
- Tin (solderable)
- Silver (conductive)
- Nickel
- Gold (flash)
- Natural brass
Inspection
- Dimensional (FAI)
- Plating thickness
- Thread gauge
- Surface finish
Testing
- Conductivity
- Contact resistance
- Plating adhesion
- Salt spray
- Pull / crimp test
Packaging
- Bulk / poly-bagged
- Tape & reel
- Tray / blister
- Custom-labeled
Documentation ships with the order. See our full quality standards →
Custom electrical components
Built to your drawing.
Custom terminal, connector pin, neutral link or bus bar? Send a drawing or sample and we'll build it to print in the right brass grade and plating, from prototype to high-volume production.
- Reverse engineering from sample
- Custom pins & contacts
- Application-specific plating
- Prototype to high-volume
Electrical components FAQ
Questions, answered.
Do you manufacture brass fuse terminals?
Yes, and they are one of the established lines here. Fuse terminals are custom-made to your drawing for use in distribution panels, terminal blocks, switchgear, circuit protection devices and industrial control systems, in brass, nickel-plated brass or tin-plated brass.
Which brass grades do you use for electrical components?
C36000, C37700, CZ121 and IS 319 Grade I and II for general terminals and contacts. Nickel plating is used where corrosion resistance matters, tin plating where conductivity and oxidation protection matter. Copper and aluminium are available on request for maximum conductivity or lighter busbars.
Why is brass used for electrical components?
Brass combines good electrical conductivity with strength, corrosion resistance and excellent machinability, the standard choice for terminals, pins, connectors and switchgear parts. For maximum conductivity we can also supply copper components on request.
Do you supply tin- and silver-plated brass contacts?
Yes. We provide tin plating for solderability and corrosion resistance, silver for high conductivity and low contact resistance, and nickel or gold where the application requires it.
Can you make EV charging pins and high-current contacts?
Yes. We manufacture high-conductivity brass charging pins, contacts and connector components for EV and power applications, machined to tight tolerances and plated for low contact resistance.
Do you produce custom terminals and neutral links to drawing?
Yes. Send your drawing or sample and we'll manufacture custom terminals, neutral links, bus bars and connectors to your exact dimensions, thread and plating.
Are RoHS-compliant and lead-free brass electrical parts available?
Yes. Low-lead brass and RoHS-compliant finishes are available across our electrical range, with compliance documentation supplied on request.
Related: Fasteners & Standoffs · Precision Turned Parts · Manufacturing capabilities
Need electrical components?
Send your drawings, spec or a sample. We'll come back with the right brass grade, plating and a clear quote.
Request a Quote