Automotive
Sensor housings, fuel-system fittings, brake-line connectors and terminals, produced under IATF 16949 with PPAP available.
Home · Industries
Industries We Serve
Precision components running in twenty-four sectors, from EV charging stations and medical gas valves to wind turbines and welding torches. Every part is made to a customer drawing at Jay Ashapura Precision Metals, under ISO 9001 and IATF 16949 certified systems.
Sectors served
Where these components end up.
Each sector below links straight to the component categories it usually needs, so you can go from your industry to the right part in one click.
Electric Vehicles
Charging connector pins, male and female contacts, busbar terminals and copper turned parts for charging equipment and powertrains.
Electrical & Electronics
Terminals, neutral links, connectors, contacts, cable glands, earthing parts and brass fuse terminals.
Medical Devices
Precision components where accuracy is not negotiable, including brass nuts for oxygen and medical gas valves.
Oil & Gas
Parts built to survive extraction and process conditions, from flanges and valve bodies to pressure fittings.
HVAC & Refrigeration
Pipe fittings, service valves and control components for heating, ventilation, cooling and refrigeration circuits.
Plumbing & Sanitary
Sanitary fittings, faucet cartridges, PEX fittings and water-meter parts, with low-lead grades where potable compliance applies.
Aerospace
Components made to endure extreme temperature and pressure, with material traceability by lot.
Defense
Mission-critical parts where consistency matters more than price, produced to drawing with full documentation.
Semiconductors
Clean, dimensionally exact metal parts for equipment used in device fabrication and handling.
Telecommunications
Connector bodies, contact pins, cable glands and housings for network and transmission equipment.
Solar Energy
Connectors, terminals and mounting hardware for panels, inverters and combiner boxes.
Wind Energy
Turned and forged components for turbines, nacelles and the electrical systems behind them.
Marine
Corrosion-resistant parts for seawater exposure, in naval brass, bronze and stainless steel.
Industrial Assembly
Fasteners, standoffs, bushings and inserts that hold machinery together and keep it serviceable.
General Industrial
Build-to-print components across sectors, which is most of what actually runs on the floor.
Heavy Equipment
Parts engineered for load and vibration in construction, mining and material-handling machines.
Aviation
Components produced to tight tolerance with the documentation that aviation supply chains expect.
CNG & LPG
High-pressure gas fittings, valve components and cylinder nuts, including O₂ and CO₂ valve nuts.
Appliances & Consumer
Threaded inserts, contacts and stamped parts inside domestic and commercial appliances.
Drone & UAV
Lightweight machined parts and inserts where every gram counts and the tolerance still has to hold.
Welding Equipment
Torch bodies, contact tips, gas fittings and connectors for welding and cutting equipment.
Construction & Hardware
Architectural hardware, glass standoffs, anchors and fixings for residential and commercial building.
Building Hardware · Fasteners & Standoffs · Threaded Inserts
Also supplied into
Sector not listed? It rarely matters. Nearly everything here is built to a customer drawing rather than a catalogue. Send your drawing →
Why sector experience matters
The part is the same. The paperwork is not.
Automotive
IATF 16949 production, PPAP on request, and change control that does not surprise you mid-programme.
Medical & gas
Material traceability by lot, leak testing where the part carries gas, and documentation that ships with the order.
Marine & outdoor
Alloy chosen for the exposure, not the price sheet. Naval brass, bronze and 316 stainless where salt is involved.
Potable water
Low-lead and DZR grades with compliance documentation, because plumbing is where material shortcuts get found.
Electrical
Conductivity and plating thickness measured and reported, since that is what sets contact resistance.
Everything else
Build to print, quoted on the drawing, with a U.S. contact who stays on the programme.
Industries FAQ
Questions, answered.
Which industries does Jay Ashapura actually supply?
Automotive and EV, electrical and electronics, medical, oil and gas, HVAC, plumbing and sanitary, aerospace and defense, semiconductors, telecommunications, solar and wind, marine, industrial assembly, heavy equipment, aviation, CNG and LPG, appliances, agriculture, drone, welding equipment and construction hardware. Components are exported to customers in more than twenty countries.
My industry is not on the list. Does that matter?
No. Almost everything produced here is made to a customer drawing rather than to a catalogue, so the sector matters far less than the part. Send the drawing and it will be quoted on its own merits.
Do you supply OEMs and Tier-1 suppliers directly?
Yes. Jay Ashapura supplies OEMs, Tier-1 and Tier-2 suppliers, connector manufacturers, wire harness companies and global sourcing groups. Kedar Hub is the U.S. point of contact for quoting and program support.
What certifications back this work?
ISO 9001:2015 and IATF 16949, both issued by TUV SUD, with VDA 6.3 compliance maintained. Automotive programs run under the IATF system with PPAP available on request.
Can you meet industry-specific documentation requirements?
Material test certificates to EN 10204 3.1, dimensional and inspection reports, and PPAP for automotive work are all available. Tell us what your quality system requires and we will confirm before quoting.
Related: All product categories · Manufacturing capabilities · Quality & certifications
Working in one of these sectors?
Send your drawing and the standard you work to. We will come back with the right material, the right documentation and a clear quote.
Request a Quote